Emulex LightPulse LP9802-F2 PCI-X Host Bus Adapter by Emulex Click 'BUY IT NOW' to get price. Available from Ritz Camera on 12-10-2008

Features: General Information Manufacturer: Emulex Corporation Manufacturer Part Number: lp9802f2 Product Line: LightPulse Manufacturer Website Address: www.emulex.com Product Type: Fibre Channel Host Bus Adapter Technical Information Ports/Channels: 1 LC Short/Long wave Optical Connector Host Interface: PCI-X 133MHz , PCI-X 100MHz , PCI-X 66MHz Backward Compatibility: PCI 66MHz 64-bit, PCI 33MHz 32-bit Fabric Support: FLPort, FPort Topology: Arbitrated Loop Fibre Channel Class Support: Class 2, Class 3 Media & Performance Connectivity Media: 50/125 ?m multi-mode Fiber Fibre Channel , 62.5/125 ?m multi-mode Data Transfer Rate: 1.0625Gbps Fibre Channel , 2.125Gbps Fibre Channel Full-duplex Data Throughput: 400 MBps Fibre Channel Full Duplex Distance Support: 1640 ft 50/125 ?m Multi-mode Fiber @ 1 Gbps, 984 ft 62.5/125 ?m Multi-mode Fiber @ 1 Gbps, 984 ft 50/125 ?m Multi-mode Fiber @ 2 Gbps, 492 ft 62.5/125 ?m Multi-mode Fiber @ 2 Gbps Management & Protocols Protocols: SCSI, TCP/IP, FC-Tape, FC-FS, FC-PH, FC-PI, FC-AL, FC-PLDA, FC-MI, FC-FLA Management: Most drivers include a full-featured implementation of the FC-MI HBA Management Interface. Memory Standard Memory: 2MB Flash , 2MB QDR Power Description Input Voltage: 3.3 V DC +/-5% Power Consumption: 7.7 W @ 66 MHz, 8.5 W Typical @ 133 MHz Environmental Conditions Temperature: 0 C (32 F) to 45 C (113 F) Operating, -40 C (-40 F) to 70 C (158 F) Storage Humidity: 5% to 95% Non-condensing Relative Humidity Physical Characteristics Form Factor: Low-profile MD2 Hot-swappable Dimensions: 2.54" Height x 6.6" Width Miscellaneous Additional Information: Automatic speed negotiation Automatic topology detection Onboard hardware context cache for superior fabric performance Support for multiple concurrent protocols Full fabric boot support in x86 and SPARC environments to multiple LUNs End-to-end parity protection for high data integrity Buffered data architecture to support over 50km cabling at full 2Gbps bandwidth Emulex Pegasus ASIC technology 266MIPs onboard processor Embedded 1Gig/2Gig SERDES Airflow required: 100 lf/m Software Features: LUN Masking LUN Mapping Persistent Binding I/O Coalescing Compatibility: Software Environments: Windows Server 2003 Windows 2000 Windows NT HP-UX Linux NetWare Solaris Hardware Environments: x86 SPARC PowerPC Certifications & Standards: PCI-X 1.0a PCI local bus revision 2.2 Agency Approvals: Class 1 Laser Product per DHHS 21CFR (J) & EN60825 UL recognized to UL 1950 CUR recognized to CSA22.2, No. 950 TUV certified to EN60950 FCC rules, Part 15, Class A ICES-003, Class A EMC Directive 89/336/EEC (CE Mark) EN55022, Class A EN55024 Australian EMC Framework (C-Tick Mark) AS/NZS 3548, Class A VCCI, Class A Warranty Standard Warranty: 3 Year(s) Product Description: The LP9802 PCI-X host bus adapter offers a highly integrated 2Gbps Fibre Channel HBA for use in servers based on either PCI or the latest PCI-X expansion bus. The LP9802 delivers exceptional performance through the use of an Emulex Pegasus ASIC, a 266MIPs onboard processor, an embedded 1Gig/2Gig SERDES, and a high performance unified QDR SRAM. The LP9802 features automatic topology detection and automatic topology detection and automatic speed negotiation capability. These capabilities allow complete compatibility with existing 1Gb/s Fibre Channel SANs, while allowing seamless upgrades to higher speed 2Gbps SANs. Main FeaturesManufacturer: Emulex CorporationManufacturer Part Number: lp9802f2Manufacturer Website Address: www.emulex.comProduct Type: Fibre Channel Host Bus AdapterPorts/Channels: 1 LC Short/Long wave Optical Connector Data Transfer Rate: 1.0625Gbps Fibre Channel , 2.125Gbps Fibre Channel Full-duplexConnectivity Media: 50/125 ?m multi-mode Fiber Fibre Channel , 62.5/125 ?m multi-mode Host Interface: PCI-X 133MHz , PCI-X 100MHz , PCI-X 66MHz Standard Memory: 2MB Flash , 2MB QDR Form Factor: Low-profile MD2 Hot-swappable Dimensions: 2.54" Height x 6.6" WidthStandard Warranty: 3 Year(s)Exclusive! On-line OnlySome manufacturers, including but not limited to: APC, IBM, HP, Sony, Panasonic, Samsung, JVC, Philips, and Microsoft have a NO RETURN POLICY and/or charge a restocking fee to return product. These manufacturers’ require you to contact them directly regarding the terms and conditions of their Warranty Policy. Exclusive Online Offers are any product with a catalog number beginning with the letters EP. Example: EP0021. We are committed to shipping your order as quickly as possible. In the event that you wish to cancel this order, the cancellation must take place within 2 hours from the time the order was placed. We are unable to cancel your order after this time period because your order is already in the fulfillment process. Click Here for Complete Return and Exchange Policies for Exclusive On-Line Products Emulex LightPulse LP9802-F2 PCI-X Host Bus Adapter Click 'BUY IT NOW' to get price. Available from Ritz Camera on 12-10-2008

Search For Products:

   
Privacy Statement

NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.

Copyright © 2008 Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108

info@cameradigger.com         Privacy Policy
Last Modified : 12-10-2008